




Polina wrote: and this is how many inches?







mkot wrote: This is a pinwheel-pegBut look what exactly is zachotno









Polina wrote: I think no motor, no metal can withstand





Tractor wrote:Polina wrote: I think no motor, no metal can withstand
on the asphalt that will drive



Tractor wrote:Polina wrote: I think no motor, no metal can withstand
on the asphalt that will drive



















retwan wrote: and crossing twice a day to change ...


retwan wrote: max speed is 50-60 km / h?
The standard is 110-120 cornfield pretty good ... until I had one new 145 even came.Paulus wrote: I wrote a ... return to the level of the standard ..


Paulus wrote: I wrote a key pair will be replaced, it niasiled something? pull it back to the level of the standard: 27 "at the SE 3.9, respectively 33" at 4.78.







Paulus wrote: on the background of the work and costs on them, half penny and Shrews seem expensive ...







Paulus wrote: .... The winch will be installed MasterWinch X9500, then perhaps stick to it even motor 6.8 hp h8288instead of nominal 6.0 hp ...

Paulus wrote: I wrote a key pair will be replaced, it niasiled something? pull it back to the level of the standard: 27 "at the SE 3.9, respectively 33" at 4.78.
Then all you can count uncomplicated way. If you do not twist it to the cutoff in the swamp, then everything is fine take out and survive. (Just sometimes need to be friends with the head)


Alex13 wrote:Paulus wrote: .... The winch will be installed MasterWinch X9500, then perhaps stick to it even motor 6.8 hp h8288instead of nominal 6.0 hp ...
but what have you battery?
Probably native engine and suck the battery at a time, and increased power even faster.
Or do you have a separate winch, but what?
How did charge a separate Accum. "
Generator is not native to burn down?


Polina wrote:Paulus wrote: I wrote a key pair will be replaced, it niasiled something? pull it back to the level of the standard: 27 "at the SE 3.9, respectively 33" at 4.78.
Then all you can count uncomplicated way. If you do not twist it to the cutoff in the swamp, then everything is fine take out and survive. (Just sometimes need to be friends with the head)
and what? I have in my pairs (5.125) machine was blunt. and 120km / h is red for her limit (and kreyserovskaya 80 km / h). and yet my wheels and less powerful dvizhek. as in the field will be - xs ... xs ...


Paulus wrote:Polina wrote:Paulus wrote: I wrote a key pair will be replaced, it niasiled something? pull it back to the level of the standard: 27 "at the SE 3.9, respectively 33" at 4.78.
Then all you can count uncomplicated way. If you do not twist it to the cutoff in the swamp, then everything is fine take out and survive. (Just sometimes need to be friends with the head)
and what? I have in my pairs (5.125) machine was blunt. and 120km / h is red for her limit (and kreyserovskaya 80 km / h). and yet my wheels and less powerful dvizhek. as in the field will be - xs ... xs ...
Pauline, give your car note will not take! Che dokapalis? normally it goes at the moment I have a hard tires 265/75/15 (31 ") 120, it goes along. The loose wet snow lowered to 0.5 sandals Rotate at reduced without much straining. Actually I was satisfied with everything, and for me it thing!




Paulus wrote:Alex13 wrote:Paulus wrote: .... The winch will be installed MasterWinch X9500, then perhaps stick to it even motor 6.8 hp h8288instead of nominal 6.0 hp ...
but what have you battery?
Probably native engine and suck the battery at a time, and increased power even faster.
Or do you have a separate winch, but what?
How did charge a separate Accum. "
Generator is not native to burn down?
So many questions, so many questions ...)))
Accum stood before 110Ah, now put the 90A, it is easier. Generator native naturally went in the trash, that the question? He was replaced by Denso 80A, which is now stationed at the top.
And suck any Accum can winch I assure you, even if you have a gene is Morelli 120А! Again return to the question of what to ride with his head.

Return to Exhibition 4x4.tomsk.ru
Users browsing this forum: No registered users and 0 guests