Wheels clothed, immediately to the machine looked like.

Good Pasha beautifully.

Blah all Ezdets, Pasha, as btsdto he built one of his ...
I immediately after the amplitude of the techies, then he podezzhal the evening, but still do and do ...
Nada muddy bumper and go on record, and then will be interesting ...

Andrew wrote: Blah all Ezdets, Pasha, as btsdto he built one of his ...

No, Andrei, no offense, your labors nobody begs.

Hleb and that with a chop??
She will live??

Shl Hleb and a barrel of Zebra has not gone to anyone ?????

Andrew wrote: a barrel in the zebra has not yet gone to anyone?

No. Only here, I thought. Plans to build, and time x ...
Light in the garage as небыло and no

Liftanuty wrote:

Andrew wrote: a barrel in the zebra has not yet gone to anyone?

No. Only here, I thought. Plans to build, and time x ...
Light in the garage as небыло and no

"Kazlu ...."

Nice kakashkalaz obtained. interesting posluhat whole chronology of the construction with a description of work, materials, cost (if desired, if only approximately). In fact govnozhurnalah pipets any money to pump into the camera - is it really all that scary?

Well, true scary, I have nothing special until the machine is not the money, he eats well ... Investments in real estate, remind me how zebra got

impressed

jam
It is really expensive!
How much money gone terribly assume no desire to simply get a heart attack

People ask, is it possible to install the 32 rubber, not cutting the wings on the Oise 469?

Yes. slightly liftanut

Ezdets Andrew
UAZku on Avtomaslennitsu'll drive?

us for the day will have to leave so that the 1 st low drive. Registered still not worth it, no stove, brakes, too, do not work. but all this while ...

EPT sorry ((
tada photoshoot ff studiyu!))

but who Fota then?
All pictures are already here on the site and in my gallery ...
Can byloby but no stove, works first reduced only, no rear window and no oil or in a box or in razdatke ...
At the fest I hope the old zebra coming and I think its another way +

Well, think how come something ....

Stsuko! Nadeilso ladders sahranit, preshlosz balgarinom shoot mazhte lengthy saidineniya, garbage kakoynibut! Selge skrutiliz entry of, I Patamushta their namazol, kagda saberal.

Engineer wrote: Stsuko! Nadeilso ladders sahranit, preshlosz balgarinom shoot mazhte lengthy saidineniya, garbage kakoynibut! Selge skrutiliz flight-, I Patamushta their namazol, kagda saberal.

Same story .....
But I do not cut grinder, and hacking at the nut with a chisel.
Quick and easy ....
Well, and also collected on grease. Grease zabodyazhil "from Litol and graphite powder. Poroshek graphite in its time "squeezed" from work. When the fireworks were working on x / d ...
Vestch!

Probably good rubyatsya chisel kalennyye Geigy??

Andrew wrote: I guess good rubyatsya chisel kalennyye Geigy??

YYY, netuzh spare me, Kada Bulgari, cut to the Chancellor with nedohadya milimetar, ladders atstrelivayutstso and Bonevur ischo hangs on the stump, and finally can achkovo!

Groin and that prostaffki bridge-spring does not stir up budezh??

Andrew wrote: I guess good rubyatsya chisel kalennyye Geigy??

Daaaaa .......
Where are you nuts on the ladder Kalen seen?
Actually, I generally never seen red-hot nuts principle the!
A srubanie nuts took less than a minute on the nut. Longer "Bulgarian" plug and pull under the bridge.

not hardened so as to heat treatment!