Share who does what with UAZom

by **Ezdets** on 11 Mar 2008, 13:13

fSERAVNO wiring change was needed. lot where the current is flowing, if the estate does not disable Accum sits down for an hour

**AdSense**

by **engineer** on 11 Mar 2008, 19:01

Andrew wrote: FSE meshes with the right side of the engine at kuzoff!!
This goes some wire!
Professor on Saturday to say!

Yes, right on kuzaff, where the switch mass apletka dalzhna be tolstaya! Otherwise Garyth, my Iskitim pravada FSE paplaviliz izzaetava!

by **Victor** on 11 Mar 2008, 19:12

His neighbor in the garage of "tail" of the mass of the engine on the body away and "mass" went on the thrust of the gas.
He discovered from the fact that poked his nose to the carburetor, and pull as much hot!
So tan did not last long ....
Water because the electrons are "cunning"! Got the same track?

by **FooLl** on 11 Mar 2008, 20:53

Do not switch to a groin mass in the upper left corner (at the foot of the driver) and still have a pigtail from the engine to the chassis ...
In short there is everything ok there are a lot ..
Posting burned because "+" closed on "-" (but the oil pressure or ignition) well and all burned, stsuko such acrid smoke was :evil:

by **AxeT** on 11 Mar 2008, 22:02

Andrew wrote: Posting burned because "+" closed on "-" (but the oil pressure or ignition) well and everything burned, stsuko such acrid smoke was

Ba blame those nasty preservatives with a wire as thick as a finger )))))))))
I like this too, such as "lohanulsya"))) to put in UAZeg Bartawi tachometer email .... And then what is the clutch master cylinder had to go bust, well, went through .... When the cork twist, it turned out that the wire from the + Ca tachometer hit by this nut, and when you turn the ignition wire that burned dully)) yyyy Tozha ogas stench there was much))) this is good that only one wire is burned for fast ignition is turned off and the mass bent))

by **Liftanuty** on 12 Mar 2008, 8:42

Andrew wrote: (at the foot of the driver) and still have a pigtail from the engine to the chassis ...

Massa touches directly on the switch to mass intake manifold (there is dyrdochka). Only the first strip to shine. If there dyrdochki, a place where it do!

by **Ezdets** on 12 Mar 2008, 10:10

Rebzi and tell my inexperienced on a single wire to leave (plus leave the battery on the coil) to any contact of the coil to hook onto?? I have it screwed to the engine, I threw the wire does not seem to go there, timer melted, as many yellow smoke poured and clamps slightly stuck to the lid

by **VitalKGB** on 12 Mar 2008, 10:23

Hee hee hee, And while you what ignition system?

by **Ezdets** on 12 Mar 2008, 10:26

contact (it was) and soon will be non-contact

by **VitalKGB** on 12 Mar 2008, 10:32

So at the contact zhazhiganii + (plus) clings to the wire that does not go to timer, and contactless on mutator for Clem where drawn +.

by **Ezdets** on 12 Mar 2008, 10:37

just + to timer?? or + to the coil??

by **VitalKGB** on 12 Mar 2008, 10:43

By the coil fits two wires one with the variator second with ignition distributer, so that cling to a variator. It's a box beneath the coil to him three wires tied-up, there's + drawn.

by **Ezdets** on 12 Mar 2008, 10:46

in! I screwed to the other. Well Nitsche, like I have another timer was :mrgreen:

by **Mafi707** on 13 Mar 2008, 18:42

Ezdets wrote: in! I screwed to the other. Well Nitsche, like I have another timer was

Familiar electrician, said if that's what some of the Toyota stick timer will be a thing, all the details in one device.

by **Ezdets** on 13 Mar 2008, 18:48

throw out, so all at once

by **Mafi707** on 13 Mar 2008, 19:30

Ezdets wrote: throw out, so all at once

heh .. yes one of, if you get up, just throw out and stand smoking bamboo!

by **Ezdets** on 14 Mar 2008, 10:51

on this and I threw the thought of imported engines and boxes, broke something, bought in a store or at a comrade's shot (well, almost stole in kraynyak) and then went

by **Mafi707** on 14 Mar 2008, 12:15

Not my generator from mittsuby stands, without any problems running ...

by **Ezdets** on 14 Mar 2008, 12:20

where does the generator?? I have on Lasik, at any time can be the native place and go further. but if properly distort the site of attachment, and so it is not just going to go back to the original

by **Mafi707** on 14 Mar 2008, 12:24

Yes I agree, but why distort it, and so on fasteners podhodit.Na much will he cost?

by **Ezdets** on 14 Mar 2008, 13:03

or 90 or 110. The unit team, should have an electrician to learn that he muddied, because inscription on the body 28 volts 36 amperes me as a confused

by **FooLl** on 14 Mar 2008, 13:06

Sunday will be exactly known

by **Mafi707** on 14 Mar 2008, 13:07

for quick hundred grams of sama th time, I also at 100.

by **FooLl** on 15 Mar 2008, 22:18

Gnu tanks on your UAZ (469, 512, 514, 519) is practically a gift!

by **FooLl** on 15 Mar 2008, 22:20

Borrow someone left tank for the summer! :roll:

I'll try that with him not to do

Share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Re: share who does what with UAZom

Who is online