Victor mastic removing ... I want sex in his boltide this trash to fill, and top luminescent riveted, so glamorous it

Pasha, with all due respect!
My wife has already promised, if he stays sealant .......

Well go there with his riveted door, and its almost new, too, promised priemshiku chermeta zaprostotak

Well go there with his riveted door, and its almost new, too, promised priemshiku chermeta zaprostotak

Gygygy

Ezdets wrote: Well, go there with his riveted door, and its almost new, too, promised priemshiku chermeta zaprostotak

The most durable battleships - were riveted!

You know Honestly STRÖM Riveted ... (I mean the door ...) would know that you need so would look at stock .... You're there yet vseravno that you will be changing and perhaps even paint, I suppose not polenishsya pereboltit and paint?

Paint - of course I will.
A riveted me not dumb at all. Released from the age when the focus is given to the appearance ....

I bought it today podkrylki and until all pure and missed - front podkrylki "prisamorezil"
Rear - not set. Since the right side has not yet turned over, and wash and fluff rear niche - not a problem. There are no such cavities in the front wheel arches.

Victor
moldtsa ... IAW worse sky t

We also covered the bottom polnustyu rubber asphalt cement. (At Derveys)

Bought today "poltorashku.
No. No beer. Hot-rolled sheets. 1,5 x 1270 x 2510. 869 rubles 70 kopecks ....
A heavy infection 39 kg ..... But UAZ - quite vpihuemy.
Will sex "book".
Body works - are continuing.

Okay. Well there you sit, but the list but do not cut out and not lie on the floor in UAZ .....
Stamped in the garage work work and work work .....

Victor wrote: Okay. Well there you sit, but the list but do not cut out and not lie on the floor in UAZ .....
Stamped in the garage work work and work work .....

Good luck!

Victor wrote: Okay. Well there you sit, but nevertheless leaves did not cut out and lie on the floor in UAZ .....
Stamped in the garage work work and work work .....

God help you!

Friendships - preparatory work before installation of the floor.
Since I switched to "sexual health" - has decided to replace all the body mount to the frame. All 12 pairs of pillows.
And then in 17 years they were "a little" worn out .....

Raised body. "Liftanul ie Ponarezal around UAZ circles. He looked - how it will look like. Do not. I will not liftovat.

New sets of airbags "pleased" Shoot!
For comparison: the new washer on the left, blYastyaschaya .... Right - the old and rusty. But the set - the old washer.
Because a 3 mm thickness is much better than 1mm ....
That same fuflyzhniki some steel manufacturers of spare parts!

Surprisingly, only two had to drill out the bolt out of 12. One bent obochto turned out to be (as contrived - fig knows! ). Second - chetyrezgrannik provernulsya.
All work (flogged) - almost three and a half hours to all-about-everything .....

UEFA then liftkomplekta not noticed

Ezdets wrote: CHE is liftkomplekta not noticed

And it does not exist. I say: simply unscrew the body from the frame and raised that would replace the pillow mounting body to the frame. Well, since I raised - decided to look the part - as will happen if liftanut to such heights. Do not like it.
That's what we kept ....

without lift kit matryshkin work ...

Close up the floor in the luggage of the machine:

Before and riveted to impose a new floor of the lorry, the harvesting of sex was prmazana most brutal manner mastic.
As the old floor has projections and depressions, and in addition places vmyat, the pre-as far as possible from the bottom floor was otrihtovan.
UAZ put up with the jack horizontally. Welded potion of the building tar, oil refining and scattered dry sand. Something like asphalt stretch happened. Mixtures were leveled all depressions in the floor. To do this, all this was heated with a blowtorch.
On top of a sheet - coated surfaced material. What would all this is not clung to her, covered with glass and lamp warmed up a reliable solder attachment to the entire surface.
It's like bad happened.
Life - will show how bad .....

Tin I'm afraid to think lope it weighs and how it smells

mitek wrote: now the rear seat

and why are they

mitek wrote: But I've been wondering now rear seats (and God forbid belts) in your car at superglue fixed?

Brackets that attach to the rear seats were left on the ground. They are almost next to the doors on the floor stand.
As for weight (approx.): list (1,5) + "asphalt" + fusing material = 18 +7 +5 = 30 kg.
Not so much. Tea is not legkovushechka!

Victor I have a question for you!
How can we repair the hole, which resulted from corrosion! Diameter of about 5 cm! a very difficult accessible place!