Mirrors on the UAZ 3151

by **nikodim70** on 07 Jul 2009, 20:06

Replaced by a mirror, 2 minutes, 130r (for some reason took the "assembly", still took the glass and put in the old building).

As for the mirrors.
I bought myself a avtoraktornyh door Lowest - garbage. I'm exhausted drive, flat glass, vibrating.
Previously, stood on the front desks - inconvenient
I looked at my dear comrade - the same town .. only spherical glass

The people, share experiences, what to take, where to put

**AdSense**

by **mitek** on 07 Jul 2009, 20:10

nikodim70 wrote: Looked at my dear comrade - the same town .., only spherical glass

The people, share experiences, what to take, where to put

last typewriter were some on the door, seemingly gazelyachi. Vision Super (they are curved). But on the wind velocities are added. Sold and not trying to win.

Now stand on flat racks, visibility figovenkaya. But fasteners tightened so that the wind does not fold. Pine tree crushed glass enclosure as standing and remained in the "right" position. :rofl:

by **nikodim70** on 07 Jul 2009, 20:27

I wanted something with a Japanese truck vkoryachit, but sorry, pancake, before the first timber, then ...

by **Sergio31519** on 07 Jul 2009, 22:52

Dima, you've seen mine, factory, just otrihtovany. A plastic luxury - fall apart after the first winter. In general, the simpler and more reliable. Remember my cornfield with plastic mirrors from Peter - whichever greater rate of nearly 100, and fold, but beautiful.

by **Dr.Mengele** on 08 Jul 2009, 18:34

Staged mirrors

by **Tractor** on 08 Jul 2009, 19:35

Dr.Mengele wrote: staged mirrors

and you're not lost touch with them for the run-off years?

by **Sergio31519** on 08 Jul 2009, 21:39

Not serious somehow, nadyt paint - the bottom yellow, green top (for contrast).

by **nikodim70** on 08 Jul 2009, 22:03

Staged mirrors

simpler, more reliable

I bought myself a avtoraktornyh door Lowest

Probably will have to take the factory, like Sergio and modify a file

The essence of completion - to invest an additional plate thickness mm 1,5-2 with welded nuts on the door by mounting the mirrors to provide additional rigidity (exclude vibration), perhaps in the more recent cars it is so

Having put these plates under the outer knob door locks made inomarochnogo closing

by **Sergio31519** on 08 Jul 2009, 22:11

nikodim70 wrote:
Probably will have to take the factory, like Sergio and modify a file

The essence of refinement - to invest an additional plate thickness 1,5-2 mm with welded nuts in the door under the mirror mount to provide additional rigidity (of vibration), perhaps in more recent cars it is so

Having put these plates under the outer knob door locks made inomarochnogo closing

Dima me tomorrow morning and up to 17-00 in the garage, they should approach. And at the expense of the plate - will open the door. There may be another lift extension, propylene grinder is top notch, and there put the plate s ~ 5 mm. with threaded, screws vkrepleniya mirrors vvurnut with locking screw - and then score at all. (Well until the wife shoes for the lack of home is not grohnet

)

by **nikodim70** on 08 Jul 2009, 23:08

well until his wife shoe for the absence of home is not grohnet

No, not hrohnet. I'm a son with him to the garage take

And about to drop - will try, what time morning begins

by **Sergio31519** on 08 Jul 2009, 23:11

Morning we start pensioners .... morning begins .... begins ... But how will arise, so it begins. Will about 9, we must also drop in to the shop

by **Victor** on 22 Nov 2009, 21:00

In the fall put the right mirror. Since 1997, traveled only to the left

After setting right with me about a week when you rebuild in the right lane was an emergency as a novice!

And now accustomed to and have difficulty in presenting - as without the right mirror before travel?

right mirror 1.jpg

right mirror 2.jpg

That's because that's stuck. While I have no complaints.

by **Victor** on 22 Nov 2009, 21:16

By the way, is possible (even likely!) - This is my "kooky", but the axis of mounting bracket to the body does not coincide with the horizontal and vertical axes. Thus, tackled the problem of "nerazbaltyvaniya" mirrors when driving on the road and kochkotistoy "neuvodu" mirror of its location. Practice has shown that the mirror is not only not "crawls" the motion, but even much less vibrate than the left, with the commensurate "console" and rigidity. Time will - left bracket vygnu "hitrovygnuto.

And the mirror itself affixed to the bracket through the leaf gum. The coefficient of friction increased. :rofl:

zakidon.jpg