Congratulations! If not a secret what size and what cost?

lemon wrote: Congratulations! If no secret what size and what cost?

Size 6 * 8
I treated them somewhere in the 50 tyrov. But this is despite the fact that 100% of work done on their own (leave in the evening after work, etc.) ... It is easy to write and it is not easy to do ...
Concrete - Cube M200 15 - 35 tyrov together with delivery
Fittings - 7 tyrov
Lumber:
Unedged board on 10re / pc - 2 Cuba - 1500P.
Beams 40 * 100 half cube 2300 p.
ASG - somewhere 11 cubes - about 2 tyrov (well, there has got freebie )
Stoymaterialov Shipping is also free, because father works in a truck ...

Works:
Down an older house
Dug a trench: width 70cm, depth 120cm max min 60 cm, total length of 35 meters (as with the jumper in the middle of length).
Fall asleep PGSom trench about 50 cm
Hand circular saw except my 2 Cuba boards on the formwork
Collected carcasses, sewed their boards (foundation height 120 cm, width 40 cm) reinforced formwork spacers
Buried rammed formwork back ground on the most do not want
I bought, cut, bent, screwed fittings - 4 floors on 2 lines (12 mm)
Tray for concrete and pouring sobsna ...

Guys .... it's just fox ... Concrete work is not exactly on the buttons to push ...

All the work is constructed so that to make myself and most cheaply (in the sense it works). On the concrete and iron tried not to save.
So, if it had hired people and paid all the materials and delivery to full, then navrno and 100ku not go up to ....

Father Lesch wrote:

Anna wrote: So, who are faced with the surveying of the land? Maybe your friends have that could quickly and inexpensively and formally?

surveying markups below it for a long, on this they should take by the throat and strangle him.

Nude in the same office said that two weeks they say and everything will be ready.

lemon wrote: Che there long then? Priezhaesh platish (such as 3000, had already forgotten) designate the date of departure and waiting for the master. Then go get the paper. Often, if the survey was carried out even vyezhayut, draw from their papers.
A:

that would quickly and inexpensively and formally

clearly incompatible something.

There has not been made part of a new one.
As a result of auto calling offices dispersion of prices from 4000 to 7000. Some say the restrictions on the pier, these price tags for sites not more than 20 hectare, I sort of agree a bit more. Actually not yet figured out. Oh.

My opinion right now to do as it is necessary and desirable in state offices or connected to them, even longer but safer. Troubled times (on earth).

I, too, 1,5 weeks ago, poured the foundation current current snow as poshel.Beton ordered a 220093: 1950kub 1000 Ships in a spacious, 4kuba = 8800.3 = 6600 cubic normal office, stood bystro.Stroitelnuyu technique where only what was not looking for the most normal office 333313 Crane Ivanovets 1000 hours, Belarus 700, but in principle they say can find any equipment

Guys, tell me. And no one did not hit well with the help of surveyors? So that would break the code?
Yes, and quite by chance we have here is not implementing these works?
hmm ... or I have asked?

Anna wrote: Guys, tell me. And no one did not hit well with the help of surveyors? So that would break the code?
Yes, and quite by chance we have here is not implementing these works?
hmm ... or I have asked?

Poor land surveyors, and such that they attack? But where to drill the well is going?

Well, that would not bore surveyors and geologists. surveyors survey done ... Well at trivia
By the way, if you drill in a large or somewhere in the thread of Anchor, and there prices twice as expensive than in other places

KadavR wrote: Well, that would not bore surveyors and geologists. surveyors survey done ... Well at trivia
By the way, if you drill in a large or somewhere in the thread of Anchor, and there prices twice as expensive than in other places

What are the prices there do not know, but the depth to normal water horizon decent. Costly will be.

Solutions at a depth of 15-20 meters,-used in food from 30 to 70 meters, from 200 artesian and deeper. Drillers say something like this in Tomsk. We've got already 3-hole drill 65 meters deep!

mnu drilled on 2tyr/pogonny meter. about the spacious told that bore on 4tyr/metr
I have right now, well 30 meters.
say, not far from me man wanted a clean drink of water, drilled to 90 meters. water is the same as everyone in the district in the wells of 25-30 meters.
ie if hotstsa entirely pure, it is necessary to artesian drilled, at 300 meters.
and there prices have orders of magnitude more

KadavR wrote: on 2tyr/pogonny meter. about the spacious told that bore on 4tyr/metr

KadavR wrote: drilled, at 300 meters.

ETOGES how firm those years, a water carrier water buit to carry on the drink, so that 600-1200r left ...

Well, as it were other than "drink" there are a few other needs, such as pamytstso, agarot burn ... with the bottles as if neudobstvenno across the garden spread, and from the well and can throw a hose, even with 300 meters.

Oh, yeah ... odd Hochland cheese like. In Rybalova, I think, if at all or anything not change.
Damn they have such dirty water in the lanes, plus then the same pay for it, plus the cost of frame ....

Anna wrote: Oh, yeah ... odd Hochland cheese like. In Rybalova, I think, if at all or anything not change.
Damn they have such dirty water in the lanes, plus then the same pay for it, plus the cost of frame ....

Not a very comfortable place. If you do not perched, the depth of wells will be about 100 meters

chaf wrote:

Anna wrote: Oh, yeah ... odd Hochland cheese like. In Rybalova, I think, if at all or anything not change.
Damn they have such dirty water in the lanes, plus then the same pay for it, plus the cost of frame ....

Not a very comfortable place. If you do not perched, the depth of wells will be about 100 meters

:(((( Quite disappointing and the presence of lakes in those regions not figure huh?

Anna, the presence of lakes is not a target. If you drink, and not only for watering the garden, All the same, it is best to consult with hydrogeologists. Wells in the 12-35 m depth usually perched, filtration with povenrhnosti and accumulates on the local Confining Layers (clays). The main disadvantage of such a large water content of iron, well, sometimes smell musty.

smell appears after 3-4 days if the water is not used. my family half a ton of missing a couple of days (the tank is worth a ton), so that the smell does not have time to appear. a neighbor bachek 2,5 tons of water, he lives alone. Here he complains that the stagnant water in his tank. In such cases, some thread of aeration should be done, at least in aquariums.
and iron - is yes, the lack of significant I have previously advocated the water in barrels (400 liters) a day or two before a big let down her tank, then the filter before the pump mechanical (bulb with a string filter). and drinking / eating more and "barrier" use.

Yes we have in Siberia water slops everywhere not ohti. before setting the station on the water samples did. 15 times the norm privyshaet dioxide, iron
(Rust) like this. station is designed for 2mes work to clean but actually a little over a month . 've found a sump boiler set until the station is working, but Sump chischyu every week there is what is there.

and Shaw for the station? be more? It's a local, one farm or township? how much power consumption, resource?

By the way, a couple of years ago we Radivoje told that in the TSU scientists invented some kind of super water purification system, designed just for the individual / self-contained buildings. The idea was that this system would at a competition then that-I take .... Since then, she did not hear. Can anyone know?

KadavR wrote: and Shaw for the station? be more? It's a local, one farm or township? how much power consumption, resource?

make our Tomsk tadpoles. tomorrow at work look and skins. it at the factory I should.

Father Lesch wrote:

KadavR wrote: and Shaw for the station? be more? It's a local, one farm or township? how much power consumption, resource?

make our Tomsk tadpoles. tomorrow at work look and skins. it at the factory I should.

Lesch, you NII BH's TV purification system cost?

Guys tell my where to buy cheap (just talking shops Nebylov) board circular saw, can anyone knows the price tag, or a good shop will tell

Lesopatolog wrote: Guys Show where to buy cheap (just talking shops Nebylov) board circular saw, can anyone knows the price tag, or a good shop will tell

Capacity, diameter, food - any means please