About spacers and cardan.

by **Tryntrynkevich** on 06 Aug 2009, 15:32

Conceived a little lift. Spacers, and all that. Rehtanul springs, spacers are placed in a shop selling those about which in the next topic, written with a finger. Kardanov only just enough. Spline no further stretched. If even higher raise them simply is not enough. How are you???

**AdSense**

by **ale** on 06 Aug 2009, 15:45

Bodick do ...

IMHO cardans working at the limit there is no buzz ...

by **Tryntrynkevich** on 06 Aug 2009, 17:31

Bodick do ...

If not difficult at that point more detail ..)

by **ale** on 06 Aug 2009, 18:15

Tryntrynkevich wrote:
Bodick do ...
If not difficult at this point more in detail ..)

Here you can poizuchat topic2215.html
The truth is not UAZ but vsezhe, should be done the same thing, kuzaf from the frame spacers to separate (lift)

by **Tryntrynkevich** on 07 Aug 2009, 13:39

Thank you.

by **Forest09** on 14 Feb 2010, 18:52

I read that the front spring spacer frame should be 2 times lower than the rear,
Is this correct?

by **Pavel77** on 14 Feb 2010, 22:25

And this is a frame-spring? Maybe spring-bridge!

by **Forest09** on 14 Feb 2010, 22:34

Well, where kranshteyn on the frame to which the earring screwed, go put spacers

by **Dr.Mengele** on 14 Feb 2010, 22:39

Forest09 wrote: Well, where kranshteyn on the frame to which the earrings are screwed, there spacers placed

Who makes?

by **index** on 14 Feb 2010, 22:52

spacer frame / spring

by **Forest09** on 14 Feb 2010, 22:54

That's because it put

by **Pavel77** on 14 Feb 2010, 22:57

That I was stupid, still do not understand? :hehe:

Yeah I do now!
IMHO. Most spring-reliable!

by **engineer** on 14 Feb 2010, 23:00

Dr.Mengele wrote: Who makes?

Well ya dapuztim ....

by **Forest09** on 14 Feb 2010, 23:02

index. spacers on the photo of what?

by **Dr.Mengele** on 14 Feb 2010, 23:08

Forest09 wrote: index. spacers on the photo of what?

Engineer wrote:
Dr.Mengele wrote: Who makes?

Well ya dapuztim ....

The engineer from the engineer products

by **engineer** on 14 Feb 2010, 23:15

Dr.Mengele wrote:
Forest09 wrote: index. spacers on the photo of what?

Engineer wrote:
Dr.Mengele wrote: Who makes?

Well ya dapuztim ....

The engineer from the engineer products

izteztvinna, karichnivyye, CAG abychna ....

by **Sanya** on 14 Feb 2010, 23:15

ale wrote: Bodick do ... IMHO cardans working at the limit there is no buzz ...

A better cut pa most nihachu

by **Forest09** on 14 Feb 2010, 23:23

The engineer, however the height of spacers?

by **engineer** on 14 Feb 2010, 23:24

Forest09 wrote: Engineer, however the height of spacers?

44

by **index** on 14 Feb 2010, 23:24

Forest09 wrote: index. spacers on the photo of what?

tubes

by **Forest09** on 14 Feb 2010, 23:26

Engineer wrote:
44

All four?

by **engineer** on 14 Feb 2010, 23:37

Forest09 wrote:
Engineer wrote:
44

All four?

current sam

by **mitek** on 15 Feb 2010, 00:52

Forest09 wrote: That's because it put

at Furniture Bolts :mad:

by **engineer** on 15 Feb 2010, 00:53

mitek wrote:
Forest09 wrote: That's it put

at Furniture Bolts

and Cho, cheap VE! :rofl:

by **Forest09** on 15 Feb 2010, 00:54

mitek wrote: at furniture bolts

Economic crisis